| Bed Length | 7' to 24' |
| Admit between Centers | 2'7" (800) to 19'6" (5950) |
| Bed Width | 18" (457), 20" (508) & 24" (610) |
| Centre Height | 15" (381), 18" (457), 20" (508), 22" (558) & 24" (610) |
| Spindle Hole | 2-1/8" (54) to 6-1/8" (156) |
Hardened & Ground Bedways, True Chuck Plate, Centre Adaptor, Dead Centre – 2 Nos., Tool Post Spanner, Change Gear Set for Whitworth and Metric Threads, Motor Pulley, Endless Flat Belt / V-Belt and Instructions & Spare Parts Manual.
Face Plate, Dog Chuck Plate, Steady Rest, Follow Rest, Norton Gear Box, Taper Turning Attachment, Electric Motor, Coolant System, Rear Tool Post with Long Cross Slide, Machine Lamp, Rear Splash Guard, Quick Change Tool Post with Tool Holders, Turcite-B coated Carriage Guideways for Bed, DP / Module Gears, Separate Lead Screw & Feed Rod, Metric Pitch Screws, Chuck and Special Attachments as per Customers' requirements.
| Model | EXH-B | EXH-C | EXH-D | EXH-E | EXH-F | EXH-G | EXH-H | EXH-I | EXH-J | EXH-K | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Length of Bed | 7' (2130) |
9' (2740) |
10' (3040) |
12' (3650) |
14' (4260) |
16' (4870) |
18' (5480) |
20' (6090) |
22' (6700) |
24' (7300) |
|
| Max. admitbetween Centers | 18"/20" Bed Width |
2'8" (810) |
4'8" (1420) |
5'8" (1725) |
7'8" (2335) |
9'8" (2945) |
11'8" (3555) |
13'8" (4165) |
15'8" (4775) |
17'8" (5385) |
19'8" (5995) |
| 24" Bed Width |
1'9" (535) |
3'9" (1145) |
4'9" (1450) |
6'9" (2060) |
8'9" (2670) |
10'9" (3280) |
12'9" (3890) |
14'9" (4500) |
16'9" (5100) |
18'9" (5700) |
|
| Spindle Hole | Standard: 3-1/8" | Optinal: 4-1/8" (104), 5-1/8" (130), 6-1/8" (156) & 8-1/8" (206) | ||||||||||
| Bed Type | 2V & 2 Flat | ||||||||||
| Height of Centre | 15" (381) | 18" (457) | 20" (508) | 22" (558) | 24" (610) | ||||||
| Max. swing over Bed Dia. | 29" (735) | 35" (890) | 39" (990) | 43" (1090) | 47"(1190) | ||||||
| Max. swing over Cross Slide Dia. | 18"/20" Bed Width |
19-1/2" (495) | 25-1/2" (645) | 29-1/2" (745) | NA | NA | |||||
| 24" Bed Width |
NA | 24" (610) | 28" (710) | 32" (810) | 36" (915) | ||||||
| Max. swing without Gap Dia | 41" (1040) | 47" (1190) | 51" (1290) | 55" (1395) | 59" (1500) | ||||||
| Width of Bed | 18" (457) | ||||||||||
| Nos. of Spindle Speed & Range | 8 (25 to 350 RPM) | ||||||||||
| Tail Stock Spindle Dia. | 3" (76) | ||||||||||
| Taper of Centers | MT-5 | ||||||||||
| Tail Stock Spindle Travel | 10" (250) | 13" (330) | |||||||||
| Cross Slide Travel | 18-1/2" (470) | 20-1/2" (520) | 22" (560) | ||||||||
| Compound Slide Travel | 8" (200) | 10" (250) | |||||||||
| Tool Post Size (Square) | 6" x 6" | 7" x 7" | |||||||||
| Tool Shank Section | 38 x 38 | ||||||||||
| Lead Screw Dia. & Pitch | 2" (50) / 2 TPI | ||||||||||
| Width of Gap in front of Face Plate | 9" (225) | ||||||||||
| No. of Inch Threads & Range | 20 / 1 to 20 TPI | Optional: Norton Gear Box – 44 / 2 to 60 TPI | ||||||||||
| No. of Metric. Threads & Range | 13 / 1 to 6 MMP | Optional: Norton Gear Box – 24 / 0.5 to 15 MMP | ||||||||||
| No. of DP Threads & Range | Optional: 11 (6 to 60) | ||||||||||
| No. of Module Threads & Range | Optional: 12 (0.3 to 2) | ||||||||||
| No. of Longitudinal Feeds | 33 / 0.008 – 2 mm/rev | Optional: Norton Gear Box – 68 / 0.034 – 1.2 mm/rev | ||||||||||
| No. of Transverse Feeds | 33 / 0.02 – 0.48 mm/rev | Optional: Norton Gear Box – 68 / 0.008 – 0.28 mm/rev | ||||||||||
| Power of AC Motor (HP) | 5 | 5 | 5 | 7.5 | 7.5 | 7.5 | 7.5 | 7.5 | 10 | 10 | |
| Weight (Approx. in kgs) | 1600 | 1700 | 2100 | 2500 | 2900 | 3400 | 3800 | 4200 | 4600 | 5000 | |
| : info@accuratelathe.com | |
| Phone | : +91 281 2361099 |
| Mobile | : +91 98242 22448 |
| |
| Weekly off | : Wednesday |
Copyright © Accurate Machine Tools. All rights reserved.